G & C Enclosures
Products

G & C aluminum, insulated enclosures are designed to house fluid conveying devices which require protection from freezing, vandalism, tampering, and/or weather degradation. Lift off, side access and top access models are available.

Lift Off
WATER SAFE Lift Off enclosures are designed to cover small backflow assemblies sized 1/4" through 2". The enclosure may be easily "lifted off" and set out of the way, permitting full access for testing and maintenance. WATER SAFE "HCK" heating systems are available for freeze protection. ASSE 1060 listed.
Front Access

WATER SAFE Front Access enclosures are designed to house equipment that can be accessed from the side through a single door. Backflow assemblies from 1" through 2" can be accessed through the door as opposed to lifting off the enclosure. WATER SAFE "HCK" heating systems are available for freeze protection. ASSE 1060 listed.
Two Door Access

WATER SAFE Two Door Access enclosures are designed for conventional in-line backflow assemblies sized 3" through 8" without strainers and 3" through 6" with strainers. There is one access door in the middle of each long side wall. Water Safe "RH" heating systems are available for freeze protection. ASSE 1060 listed.
Four Door Access

WATER SAFE Four Door Access enclosures are designed for conventional in-line backflow assemblies sized 8" with strainers and 10" with or without strainers. There are two access doors side by side and in the middle of each long side wall. WATER SAFE "RH" heating systems are available for freeze protection. ASSE 1060 listed.
Febco Master Series

WATER SAFE Febco Master Series enclosures were originally designed to house Febco's "n" pattern backflow assemblies. Most models of Wilkins 450/475 series of "n" pattern assemblies will also fit. Two opposing doors and a roof that opens, reveal the assembly for full access. WATER SAFE "RH" heating systems are available for freeze protection. ASSE 1060 listed.
Roll Top

Roll Top enclosures are heavy duty enclosures with tops that roll out of the way for full access. They are designed to house "n" pattern and short lay length backflow assemblies. WATER SAFE "RH" heating systems are available for freeze protection.
Coverall

Coverall enclosures are specialty enclosures that may be used as a sign. Backflow assemblies must be light enough so that pipe supports are not required. They are side accessed.
Custom

Custom enclosures are designed individually to meet the customer's specific needs. We have designed and built enclosures for meters, pumps, control valves, water treatment equipment, environmental equipment, etc.